Digital Cinema Naming Convention

Appendix #8

 

Standard and Package Type 

Standard     To date, most Digital Cinema Packages are distributed in the Interop-DCP format.  The design of these packages adheres to a de facto standard that has become common practice.  The industry is attempting to move to the formal SMPTE (Society of Motion Picture and Television Engineers) standards.  This mainly impacts servers, not projectors; however, rendering of subtitles in the projectors may be affected.  In order to identify the construction of the package, the standard is explicitly denoted "-IOP" for an Interop-DCP package and "-SMPTE" for a SMPTE-DCP package.  Additionally, if the package is a 3D package the extension of "-3D" is added to the field.  This is done so that a quick check of the end of the file name indicates the standard and whether or not the package is in 3D.

 

There are certain rules that must be applied when labeling OV and VF files:

 

Every feature version will be numbered in the Content Type field.  For example:

 

     MOVIE-TITLE_FTR-1_F_EN-XX_US-PG_51-EN_2K_ST_20070115_FAC_OV

     MOVIE-TITLE_FTR-2_F_EN-XX_US-PG_51-EN_2K_ST_20070115_FAC_OV

 

In the example above, notice that Feature Version #1 and Feature Version #2 both have their own OV files.  Each OV file contains an entire version of the feature, and will play the feature without any additional files (except for the KDM).

 

Although there is the original OV file for the first language version of a feature, there can also be additional OV files for Generic International Versions.  These Generic Versions can be either texted or textless, and should be coded in the Territory Field of the Naming Convention as follows:

      INT-TD = texted

 

     INT-TL = textless

For example:

 

The original English language version for the US might be titled:

 

     MOVIE-TITLE_FTR-1_F_EN-XX_US-G_51-EN_2K_ST_20070115_FAC_OV

 

The Generic International Texted version of the feature has its own separate OV.  It's labeled:  "INT-TD" in the Territory Field, and "FTR-2" in the Content Type Field:

 

     MOVIE-TITLE_FTR-2_F_EN-XX_INT-TD_51-EN_2K_ST_20070115_FAC_OV

 

The Generic International Textless version has its own OV as well.  It's labeled "INT-TL" in the Territory Field, and "FTR-3" in the Content Type Field:

 

     MOVIE-TITLE_FTR-3_F_EN-XX_INT-TL_51-EN_2K_ST_20070115_FAC_OV

 

It is extremely important that you differentiate all of the OV files with different version numbers in the Content Type field.

 

You do not need to create a new OV file, however, for each localized version of a feature.  This can be done using an existing OV file, in concert with a VF or "Version File".

 

The DCP of the original US, English language version might be labeled:

 

     MOVIE-TITLE_FTR-1_F_EN-XX_US-PG_51-EN_2K_ST_20070115_FAC_OV

 

For the French version, you can create a supplemental package with a version file containing the changes.  This might be labeled:

 

     MOVIE-TITLE_FTR-1_F_FR-XX_FR-AA_51-EN_2K_ST_20070115_FAC_VF-1

 

The number "1" in "VF-1" indicates that you need the OV file of FTR-1 (Feature Version #1) in addition to the VF-1 file in order to play the new version of the feature correctly.  Both files played together will create the French version.  Note that the feature version number in the Content Type field has not changed.

 

The feature version number does not change with simple localization changes so long as you are using Version Files.

 

If you want to create an OV for a localized version of a feature, you can, but the feature version number in the Content Type field must change.  (You can never have more than one OV for a given feature version.)

 

If you are making picture or sound changes that apply to multiple locations, you must create a new OV with a new feature version number.

 

The version file mechanism can also be used to create Open and Closed Caption versions of content.

In the Composition Playlist

A CPL is assumed to be associated with a SMPTE-DCP package; Interop-DCP is a legacy format that is being phased out.


Package Type     Most Digital Cinema Packages contain an entire feature or trailer.  Sometimes, however, a "Supplemental" Digital Cinema Package is sent with an alternate reel, different language, or other features.  This "Supplemental Package" does not usually contain the entire feature; in these cases, both packages are necessary to run the feature as intended.  In order to differentiate package types and the CPLs associated with them, i.e., to know if a package is likely to contain an entire feature or a partial one, a code is added at the tail of the CPL Naming Convention.  There are two codes of this type: 


OV = Original Version

 

and

 

VF = Version File


      An "OV", or "Original Version" package, always contains an entire feature.  The "VF" or "Version File" usually contains a partial feature (e.g.: subtitles, alternate language, pickup shots) and must be loaded together with the OV track files in order to play the feature correctly.  An OV package shipped by itself always contains its own CPL and track files.  A VF package shipped by itself always contains its own CPL, often some alternative track files, and relies on the existing OV track files.  A VF package is sometimes shipped with its corresponding OV package.  In this case, the OV package doesn't need its own CPL because the VF CPL determines playout.  (See figure below.)

In the Composition Playlist

The Content Version value could be listed at //ContentVersion:

<CompositionPlaylist>

     xmlns="http://www.smpte-ra.org/schemas/429-7/2006/CPL">

     ...

     <ContentVersion>

          <Id>OV</Id>

          <LabelText>Package Type</LabelText>

     </ContentVersion>

     ...

</CompositionPlaylist>



Alternatively, this information could be listed as an Alternate Content Version in //Reel[1]//AlternateContentVersionList/ContentVersion[n]:

<CompositionMetadataAsset>

     xmlns="http://www.smpte-ra.org/schemas/429-16/2014/CPL-Metadata">

     ...

     <AlternateContentVersionList>

          ...

          <ContentVersion>

               <cpl:Id>OV</cpl:Id>

               <cpl:LabelText>Package Type</cpl:LabelText>

          </ContentVersion>

          ...

     </AlternateContentVersionList>

     ...

<CompositionMetadataAsset/>


Additional Notes:

     1) The CPL doesn't have an explicit concept of OV/VF; using ContentVersion or AlternateContentVersion is merely a recommendation.

     2) The CPL has a top-level "Id" element that contains a UUID that can be used to unambiguously refer to a specific instance.